EPDM anti-acid rubber
EPDM antacid rubber is a type of synthetic rubber, it is a high density rubber. Commercial standard EPDM rubber contains sulfur and is resistant to oxygen, healthy air and ozone. It works better if the software is smooth and not under pressure.
Common features of EPDM are abrasion resistance and a wider range of temperature and low electrical conductivity. EPDM, combined with peroxide, is commonly used for a wide range of temperatures and chemical resistance.
White EPDM is available for food industry or other health applications. For mechanical packing, high compression load on flanges and in cases where good stability in dimensions is required, imported EPDM made of nylon is the usual material used.
Physical characteristics: Thickness 1-6 mm is made by glossy surface, thickness is 7-80 mm, with medium hardness and high tensile strength, excellent performance and high resistance to abrasion, resistant to alkaline acids, High heat resistant, low temperature resistant, ozone resistant, containing 50% acid or alkali at -40 ° C - + 130 ° C (maximum 150 ° C instant). Apply mechanical equipment to seal all types of seals, gaskets and other shapes and coatings.
Characteristics of EPDM anti-acid EPDM rubber
EPDM rubber (ethylene propylene dione monomer) is a type of synthetic elastomer
Fire-resistant, hot, cold and alkaline hydraulic fluids. EPDM rubber used in sealing.
Hoses, pipes, water intakes, washers, belts, electrical insulation, vibrators, O-rings and so on.
Also used as a means of water resistance in electrical connection, roof membranes
(Because rainwater is not contaminated, it is important to collect rain)
Material: Virgin EPDM or EPDM / SBR
Quality: industrial grade, food grade
Color: black, white, red, gray and so on
Surface: smooth, smooth / smooth fabric, double cloth
Tensile strength: 4-12 MPa
Hardness: 40, 50, 60, 70, 80 +/- 5shore A
Length: 250 ٪ -380 ٪
Density: 1.25-1.50g / cm3
Working temperature: -30 ° C - + 130 ° C
Length: 0.1-20 meters